As a gateway, the CloudBox 4.0 establishes the connection between the Internet and the wireless sensors and actuators in the home. For this purpose, the CloudBox 4.0 has several connections. The USB-C connection is used to power the CloudBox via the USB power supply. In the future, the CloudBox can be expanded to include additional radio protocols via the USB-A connection. The CloudBox is connected to your router via WiFi. Alternatively, you can also connect the CloudBox via a network cable. When you buy a CloudBox, your customer account gives you free access to the everHome service for as long as the CloudBox is in use. It is not necessary for a PC, iPhone, iPad, SmartPhone or tablet to be in the home network. Several CloudBoxes can also be used with the customer account in order to increase the radio range in larger buildings or to also control a second home. To do this, each sensor/actuator in the portal is assigned one of the CloudBoxes.
Requirements Router with DHCP. Internet connection required. Chrome 63 or higher. Firefox 61 or higher . Edge 17 or higher. iOS version 10 or higher. macOS Safari 11.1 or higher. Android version 4.4 or higher.
Scope of delivery 1 x CloudBox 4.0 . 1 x USB-C power pack with connection cable. Technical data Device designation: CloudBox 4.0. Supply voltage USB power pack input: 230 VAC/50 Hz. Supply voltage: 5 V DC current consumption: 1500 mA. Ambient temperature: 0 °C to 40 °C. Dimensions (W x H x D): 100 x 35 x 100 mm. Weight: 134 g. Radio frequency : 433MHz, 868MHz, 2.4GHz ZigBee
Notice
Please note that the CloudBox 4.0 BASIS can only control the following manufacturers:Chacon DI-OELROHome easyNexaPaulmannPollinREVSmartwaresSonoffTrustVivancobrennenstuhlcentorcocodüwiintertechnoxavax